通過Barcode Professional SDK生成的條形碼具有高分辨率以使其獲得更利于輸出打印的質量。

以下為PDF文檔插入條形碼前后的圖像：

詳細步驟：

1. 下載并安裝最新版Barcode Professional SDK for .NET
2. 下載并安裝
3. 打開Visual Studio新建一個項目，例如，一個控制臺應用程序
4. 在創(chuàng)建的項目中，添加一個引用到itextsharp.dll和Neodynamic.SDK.Barcode.dll程序集
5. 下載PDF文檔示例到C:\temp，命名為SampleDoc.pdf
6. 復制/粘貼以下代碼在您的項目中:

VB

Dim pdfFile As String = "C:\Temp\SampleDoc.pdf"
Dim pdfFileOut As String = "C:\Temp\SampleDoc_barcode.pdf"
Dim dpi As Integer = 300

'1. Open the PDF file using a PdfReader
Dim pdfReader As New iTextSharp.text.pdf.PdfReader(pdfFile)
'2. Create a PdfStamper object for inserting or stamping the barcodes...
Dim pdfStamper As New iTextSharp.text.pdf.PdfStamper(pdfReader, new System.IO.FileStream(pdfFileOut, System.IO.FileMode.Create, System.IO.FileAccess.Write))
'3. Get the page content from the PDF file by creating a PdfContentByte object           
Dim pdfPage As iTextSharp.text.pdf.PdfContentByte = pdfStamper.GetOverContent(1)
Dim pageWidth As Single = pdfReader.GetPageSize(1).Width
Dim pageHeight As Single = pdfReader.GetPageSize(1).Height
'4. Generate the barcode images using Barcode Professional SDK

'4.1. Generate the UPC-A CCB composite barcode.
Using bc1 As New Neodynamic.SDK.Barcode.BarcodeProfessional()
    'set the desired barcode symbology e.g. UPC-A CCB
    bc1.Symbology = Neodynamic.SDK.Barcode.Symbology.UpcACCB
    'set the value to encode e.g. Primary Data = 01234567890 and Secondary Data = 991234-abcd
    bc1.Code = "01234567890|991234-abcd"
    'set the barcode unit and sizes...
    bc1.BarcodeUnit = Neodynamic.SDK.Barcode.BarcodeUnit.Inch
    bc1.BarWidth = 0.013 'the narrow bar width a.k.a. X value
    bc1.BarHeight = 1 'the height of the barcode bars 
    bc1.GuardBarHeight = bc1.BarHeight + 5 * bc1.BarWidth 'the height of the guard bars only available for EAN/UPC barcodes
    bc1.QuietZoneWidth = 9 * bc1.BarWidth 'the quiet zone for UPC-A is 9 times the BarWidth value per GS1 spec

    'Generate the barcode image content for inserting it into the PDF page
    'For high quality, you can generated the barcode at, for instance, 300 dpi
    Dim barcodeImage1 As iTextSharp.text.Image = iTextSharp.text.Image.GetInstance(bc1.GetBarcodeImage(System.Drawing.Imaging.ImageFormat.Png, dpi))
    'set the position of the barcode image. PDF uses Points as unit (1 point = 1/72 inch)
    'the starting point (x=0, y=0) in the PDF coord is the bottom-left corner!!!
    barcodeImage1.SetAbsolutePosition(pageWidth - 4.25F * 72F + ((3.25F - (barcodeImage1.Width / dpi))/2) * 72F , pageHeight - ((barcodeImage1.Height / dpi) * 72F) - (2.5F * 72F))
    'scale the image based on the image dpi
    barcodeImage1.ScalePercent(72F / CSng(dpi) * 100F)
    'add the image object to the pdf page
    pdfPage.AddImage(barcodeImage1)            
End Using

'4.2. Generate the 2D Micro PDF417 barcode.
Using bc2 As New Neodynamic.SDK.Barcode.BarcodeProfessional()
    'set the desired barcode symbology e.g. Micro PDF417
    bc2.Symbology = Neodynamic.SDK.Barcode.Symbology.MicroPdf417
    'set the value to encode e.g. ABCDE-1234567890-PDF
    bc2.Code = "ABCDE-1234567890-PDF"
    'set the barcode unit and sizes...
    bc2.BarcodeUnit = Neodynamic.SDK.Barcode.BarcodeUnit.Inch
    bc2.BarWidth = 0.01 'the narrow bar width a.k.a. X value
    bc2.BarRatio = 3 'in MicroPdf417 each bars' heigh in a row is calculated as BarWidth * BarRatio
                
    'Generate the barcode image content for inserting it into the PDF page
    'For high quality, you can generated the barcode at, for instance, 300 dpi
    Dim barcodeImage2 As iTextSharp.text.Image = iTextSharp.text.Image.GetInstance(bc2.GetBarcodeImage(System.Drawing.Imaging.ImageFormat.Png, dpi))
    'set the position of the barcode image. PDF uses Points as unit (1 point = 1/72 inch)
    'the starting point (x=0, y=0) in the PDF coord is the bottom-left corner!!!
    barcodeImage2.SetAbsolutePosition(72F + ((3.25F - (barcodeImage2.Width / dpi)) / 2) * 72F, pageHeight - ((barcodeImage2.Height / dpi) * 72F) - (6F * 72F));
    'scale the image based on the image dpi
    barcodeImage2.ScalePercent(72F / CSng(dpi) * 100F)
    'add the image object to the pdf page
    pdfPage.AddImage(barcodeImage2)
End Using

'4.3. Generate the GS1 DataBar-14 Stacked barcode.
Using bc3 As New Neodynamic.SDK.Barcode.BarcodeProfessional()
    'set the desired barcode symbology e.g. DataBar-14 stacked
    bc3.Symbology = Neodynamic.SDK.Barcode.Symbology.GS1DataBar14Stacked
    'set the value to encode e.g. 0061414199999
    bc3.Code = "0061414199999"
    'set the barcode unit and sizes...
    bc3.BarcodeUnit = Neodynamic.SDK.Barcode.BarcodeUnit.Inch
    bc3.BarWidth = 0.0208 'the narrow bar width a.k.a. X value
                
    'Generate the barcode image content for inserting it into the PDF page
    'For high quality, you can generated the barcode at, for instance, 300 dpi
    Dim barcodeImage3 As iTextSharp.text.Image = iTextSharp.text.Image.GetInstance(bc3.GetBarcodeImage(System.Drawing.Imaging.ImageFormat.Png, dpi))
    'set the position of the barcode image. PDF uses Points as unit (1 point = 1/72 inch)
    'the starting point (x=0, y=0) in the PDF coord is the bottom-left corner!!!
    barcodeImage3.SetAbsolutePosition(pageWidth - 4.25F * 72F + ((3.25F - (barcodeImage3.Width / dpi)) / 2) * 72F, pageHeight - ((barcodeImage3.Height / dpi) * 72F) - (6f * 72F));
    'scale the image based on the image dpi
    barcodeImage3.ScalePercent(72F / CSng(dpi) * 100F)
    'add the image object to the pdf page
    pdfPage.AddImage(barcodeImage3)
End Using

'close PdfStamper
pdfStamper.Close()
'close PdfReader
pdfReader.Close()

													

C#

string pdfFile = @"C:\Temp\SampleDoc.pdf";
string pdfFileOut = @"C:\Temp\SampleDoc_barcode.pdf";
int dpi = 300;

//1. Open the PDF file using a PdfReader
iTextSharp.text.pdf.PdfReader pdfReader = new iTextSharp.text.pdf.PdfReader(pdfFile);
//2. Create a PdfStamper object for inserting or stamping the barcodes...
iTextSharp.text.pdf.PdfStamper pdfStamper = new iTextSharp.text.pdf.PdfStamper(pdfReader, new System.IO.FileStream(pdfFileOut, System.IO.FileMode.Create, System.IO.FileAccess.Write));
//3. Get the page content from the PDF file by creating a PdfContentByte object           
iTextSharp.text.pdf.PdfContentByte pdfPage = pdfStamper.GetOverContent(1);
float pageWidth = pdfReader.GetPageSize(1).Width;
float pageHeight = pdfReader.GetPageSize(1).Height;
//4. Generate the barcode images using Barcode Professional SDK

//4.1. Generate the UPC-A CCB composite barcode.
using (Neodynamic.SDK.Barcode.BarcodeProfessional bc1 = new Neodynamic.SDK.Barcode.BarcodeProfessional())
{
    //set the desired barcode symbology e.g. UPC-A CCB
    bc1.Symbology = Neodynamic.SDK.Barcode.Symbology.UpcACCB;
    //set the value to encode e.g. Primary Data = 01234567890 and Secondary Data = 991234-abcd
    bc1.Code = "01234567890|991234-abcd";
    //set the barcode unit and sizes...
    bc1.BarcodeUnit = Neodynamic.SDK.Barcode.BarcodeUnit.Inch;
    bc1.BarWidth = 0.013; //the narrow bar width a.k.a. X value
    bc1.BarHeight = 1; //the height of the barcode bars 
    bc1.GuardBarHeight = bc1.BarHeight + 5 * bc1.BarWidth; //the height of the guard bars only available for EAN/UPC barcodes
    bc1.QuietZoneWidth = 9 * bc1.BarWidth; //the quiet zone for UPC-A is 9 times the BarWidth value per GS1 spec

    //Generate the barcode image content for inserting it into the PDF page
    //For high quality, you can generated the barcode at, for instance, 300 dpi
    iTextSharp.text.Image barcodeImage1 = iTextSharp.text.Image.GetInstance(bc1.GetBarcodeImage(System.Drawing.Imaging.ImageFormat.Png, dpi));
    //set the position of the barcode image. PDF uses Points as unit (1 point = 1/72 inch)
    //the starting point (x=0, y=0) in the PDF coord is the bottom-left corner!!!
    barcodeImage1.SetAbsolutePosition(pageWidth - 4.25f * 72f + ((3.25f - (barcodeImage1.Width / dpi))/2) * 72f , pageHeight - ((barcodeImage1.Height / dpi) * 72f) - (2.5f * 72f));
    //scale the image based on the image dpi
    barcodeImage1.ScalePercent(72f / (float)dpi * 100f);
    //add the image object to the pdf page
    pdfPage.AddImage(barcodeImage1);                
}

//4.2. Generate the 2D Micro PDF417 barcode.
using (Neodynamic.SDK.Barcode.BarcodeProfessional bc2 = new Neodynamic.SDK.Barcode.BarcodeProfessional())
{
    //set the desired barcode symbology e.g. Micro PDF417
    bc2.Symbology = Neodynamic.SDK.Barcode.Symbology.MicroPdf417;
    //set the value to encode e.g. ABCDE-1234567890-PDF
    bc2.Code = "ABCDE-1234567890-PDF";
    //set the barcode unit and sizes...
    bc2.BarcodeUnit = Neodynamic.SDK.Barcode.BarcodeUnit.Inch;
    bc2.BarWidth = 0.01; //the narrow bar width a.k.a. X value
    bc2.BarRatio = 3; //in MicroPdf417 each bars' heigh in a row is calculated as BarWidth * BarRatio
                
    //Generate the barcode image content for inserting it into the PDF page
    //For high quality, you can generated the barcode at, for instance, 300 dpi
    iTextSharp.text.Image barcodeImage2 = iTextSharp.text.Image.GetInstance(bc2.GetBarcodeImage(System.Drawing.Imaging.ImageFormat.Png, dpi));
    //set the position of the barcode image. PDF uses Points as unit (1 point = 1/72 inch)
    //the starting point (x=0, y=0) in the PDF coord is the bottom-left corner!!!
    barcodeImage2.SetAbsolutePosition(72f + ((3.25f - (barcodeImage2.Width / dpi)) / 2) * 72f, pageHeight - ((barcodeImage2.Height / dpi) * 72f) - (6f * 72f));
    //scale the image based on the image dpi
    barcodeImage2.ScalePercent(72f / (float)dpi * 100f);
    //add the image object to the pdf page
    pdfPage.AddImage(barcodeImage2);
}

//4.3. Generate the GS1 DataBar-14 Stacked barcode.
using (Neodynamic.SDK.Barcode.BarcodeProfessional bc3 = new Neodynamic.SDK.Barcode.BarcodeProfessional())
{
    //set the desired barcode symbology e.g. DataBar-14 stacked
    bc3.Symbology = Neodynamic.SDK.Barcode.Symbology.GS1DataBar14Stacked;
    //set the value to encode e.g. 0061414199999
    bc3.Code = "0061414199999";
    //set the barcode unit and sizes...
    bc3.BarcodeUnit = Neodynamic.SDK.Barcode.BarcodeUnit.Inch;
    bc3.BarWidth = 0.0208; //the narrow bar width a.k.a. X value
                
    //Generate the barcode image content for inserting it into the PDF page
    //For high quality, you can generated the barcode at, for instance, 300 dpi
    iTextSharp.text.Image barcodeImage3 = iTextSharp.text.Image.GetInstance(bc3.GetBarcodeImage(System.Drawing.Imaging.ImageFormat.Png, dpi));
    //set the position of the barcode image. PDF uses Points as unit (1 point = 1/72 inch)
    //the starting point (x=0, y=0) in the PDF coord is the bottom-left corner!!!
    barcodeImage3.SetAbsolutePosition(pageWidth - 4.25f * 72f + ((3.25f - (barcodeImage3.Width / dpi)) / 2) * 72f, pageHeight - ((barcodeImage3.Height / dpi) * 72f) - (6f * 72f));
    //scale the image based on the image dpi
    barcodeImage3.ScalePercent(72f / (float)dpi * 100f);
    //add the image object to the pdf page
    pdfPage.AddImage(barcodeImage3);
}

//close PdfStamper
pdfStamper.Close();
//close PdfReader
pdfReader.Close();